Last Updated on March 26, 2025 by Jaxon Mike
Attaching a Saris bike rack to your car may seem hard. But it’s easy with the right steps. This guide will help you. Follow these steps, and you’ll be ready to go.
Step 1: Gather Your Tools
First, gather all the tools you need. You will need:
- Saris bike rack
- Instruction manual
- Wrench or screwdriver
- Soft cloth
Having these tools will make the job easier. Make sure you have them ready.
Step 2: Read the Manual
The instruction manual is important. It shows how to attach the bike rack. Read it carefully. It has pictures and steps. This will help you understand better.
Credit: saris.com
Step 3: Clean the Car
Use a soft cloth to clean your car. Focus on the area where the rack will attach. This will help the rack stick better. It also prevents scratches.
Step 4: Open the Bike Rack
Next, open the Saris bike rack. It may have arms or straps. Make sure everything is open and ready. Check for any damage.
Step 5: Place the Rack on the Car
Place the bike rack on the car. The top part goes on the trunk or roof. Align it properly. This helps to keep it steady.
Step 6: Attach the Straps
Now, attach the straps. There are usually four straps. Two for the top and two for the bottom. Hook the top straps first. Make sure they are tight. Then, hook the bottom straps. Tighten them as well.
Check if the rack is steady. If not, adjust the straps. They need to be very tight.
Credit: www.youtube.com
Step 7: Secure the Arms
Some Saris bike racks have arms. These hold the bike. Adjust the arms to fit your bike. Use the wrench or screwdriver if needed. Make sure the arms are secure.
Step 8: Test the Rack
Before you put your bike, test the rack. Push it a little. It should not move. If it moves, tighten the straps more. Make sure it is very steady.
Step 9: Load Your Bike
Now, you can load your bike. Lift the bike and place it on the rack. Secure it with the arms. Make sure it is tight. The bike should not move.
Step 10: Final Check
Do a final check. Make sure everything is tight and secure. Check the straps and the arms. Make sure the bike is steady. Now you are ready to go.
Tips for Safe Use
Here are some tips for safe use:
- Always check the rack before driving.
- Drive slowly when you have bikes on the rack.
- Avoid rough roads to keep the bikes safe.
- Check the rack and straps often.
Frequently Asked Questions
How Do I Attach A Saris Bike Rack To My Car?
First, open the rack. Then, place it on your car’s rear end. Secure the straps. Done!
Can I Use The Saris Bike Rack With Any Car?
Yes, most Saris bike racks fit various car models. Always check the compatibility guide.
How Many Bikes Can A Saris Bike Rack Hold?
Typically, Saris bike racks hold 2-4 bikes. Check the model specifications for details.
Is It Easy To Install A Saris Bike Rack?
Yes, installation is straightforward. Just follow the step-by-step instructions provided in the manual.
Do I Need Tools To Install A Saris Bike Rack?
No, most Saris bike racks do not require tools for installation. Just use the straps and clips.
Can I Leave The Saris Bike Rack On My Car?
Yes, but it’s best to remove it when not in use. It prevents wear and tear.
Conclusion
Attaching a Saris bike rack is not hard. Just follow these steps. Read the manual, clean the car, and attach the straps. Make sure everything is tight. Now you can enjoy your bike rides. Be safe and have fun!
