21-20003-02 Hood Quicklift Fits Jeep Review: Strong Support?

Last Updated on November 18, 2026 by Jaxon Mike

21-20003-02 Hood Quicklift Fits Jeep

21-20003-02 Hood Quicklift Fits Jeep

4.9
Check Price on Amazon →

The 21-20003-02 Hood Quicklift Fits Jeep is a top-tier upgrade for aluminum-hood Jeep owners.

It’s built for Wrangler JL (2018+) and Gladiator (2020+) models in North America, and the 4.9-star rating reflects how well it replaces the factory prop rod.

  • Bolt-in design, no drilling or modifications needed
  • Quick-release struts for full hood access
  • End-of-stroke dampening reduces stress
  • Durable black powder-coated hardware
  • 4-year warranty on all components

We’ll walk through the key features, fitment details, and what to expect after installation.

How it scores

  • Fitment 9.5
  • Build Quality 8.8
  • Ease of Install 8.5
  • Value 8.2
  • Durability 7.8

What Makes the 21-20003-02 Hood Quicklift Fits Jeep Worth Knowing About

This hood quicklift system is built specifically for aluminum-hood Jeeps, with a bolt-on design that skips the drilling and gets straight to the convenience. Here’s a rundown of the features that matter most.

  • Aluminum Hood Fitment: This 21-20003-02 kit is compatible with Jeep Wrangler JL (2018+), Jeep Gladiator (2020+), and all aluminum hoods for North America — but it’s not for steel hoods, Mojave, or 392 models (those need different part numbers).
  • Bolt-In Installation: Uses existing mounting points with vehicle-specific hardware, so you’ll only need simple hand tools — no drilling, cutting, or permanent modifications required.
  • Corrosion-Protected Build: All steel hardware is zinc-plated and then black powder coated, giving you a durable finish that holds up against rust and wear.
  • Quick-Release Struts: Lower attachments feature a quick-release mechanism, letting you pop the hood free from the gas struts when you want it to rest back on the windshield like stock, then snap it back on when you’re ready.
  • Smooth End Dampening: Progressive-rate valving slows the strut extension over the final inches of travel, which reduces stress on both the hood and the mounting hardware.
  • 4-Year Warranty: All Quicklift Plus components are covered for four years, giving you peace of mind on the long haul.

If you’ve got an aluminum-hood JL or Gladiator, this system pairs easy install with practical, everyday convenience.

What the 21-20003-02 Hood Quicklift Fits Jeep Gets Right—and Where to Double-Check

What works well

  • Bolt-in install uses existing mounts—no drilling or modifications needed.
  • Quick-release design lets you snap struts off to access the hood normally.
  • Smooth, controlled lift with end-of-stroke dampening reduces stress on hood hardware.
  • Durable black finish with zinc plating and powder coat resists corrosion well.
  • Reliable hold keeps the hood firmly open at full extension.

What to watch out for

  • Aluminum hoods only—not compatible with steel or aftermarket hoods.
  • Excludes special trims like Mojave or Rubicon 392 that need higher-force struts.
  • Quick-release clips may feel stiff until they loosen with use.
  • Check fitment for outside North America—steel hoods require a different kit.
21-20003-02 Hood Quicklift Fits Jeep Review: Strong Support?

Why the 21-20003-02 Hood Quicklift Fits Jeep Is a Must-Have Upgrade

You’re tired of wrestling that heavy hood prop rod every time you check your oil. The Redline Tuning 21-20003-02 Hood Quicklift changes that completely, giving you instant, hands-free hood support.

It’s a simple bolt-on system that makes daily access to your engine bay feel effortless.

With a 4.9-star customer rating, it’s clear this kit earns its reputation. Reviewers consistently praise how easy it is to install and how well it works on aluminum-hood Jeeps.

Installation Is Truly Bolt-On and Hassle-Free

You won’t need to drill, cut, or modify your Jeep at all. The kit uses existing mounting locations on your vehicle, so all you need are basic hand tools.

Most buyers report finishing the install in under 30 minutes. The included hardware is black powder-coated, which adds corrosion protection and a clean factory look.

The system is designed for Wrangler JL (2018+) and Gladiator JT (2020+) with aluminum hoods only. If your Jeep has a steel hood, Mojave trim, or the 392 model, you’ll need a different Redline kit.

Build Quality and Materials You Can Trust

Every metal component gets double-treated: zinc-plated first, then black powder-coated. That means the hardware resists rust and wear even if you live in salty or rainy climates.

The $5,000 Car Savings Challenge

Find hidden car costs. Compare insurance, fuel, service and repair bills with a 200-page illustrated workbook and practical action sheets.

Start my audit $37

The gas springs themselves are built to last, backed by a 4-year warranty on all Quicklift Plus parts. Reviewers note the struts feel solid and well-engineered right out of the box.

At just 1.4 pounds total, the kit adds negligible weight to your Jeep. You’ll barely notice it’s there until you need it.

Performance and Daily Use Are Impressive

Once installed, you simply lift the hood and it stays open securely. The progressive-rate valving ensures smooth, controlled motion throughout the lift.

End-of-stroke dampening slows the final few inches of travel, which reduces stress on your hood and mounts. Reviewers appreciate how the hood doesn’t slam or bounce when fully raised.

The quick-release feature lets you detach the struts in seconds. You’ll be able to lay the hood fully back against the windshield just like stock, which is handy for certain repairs or trail maintenance.

Real-World Fitment and Compatibility

This kit is specifically engineered for North American aluminum hoods on JL and JT models. If you have an aftermarket hood, it likely won’t fit because those often need higher-force struts.

Buyers with standard Wrangler and Gladiator aluminum hoods report a perfect fit with zero rattles or misalignment. The hardware lines up cleanly with factory holes, so there’s no guesswork.

For Jeep owners with steel hoods, Mojave editions, or 392 models, Redline offers other part numbers to match your needs. Just make sure you order the right kit for your specific vehicle.

Quick Specs at a Glance

SpecificationDetail
BrandRedline Tuning
Part Number21-20003-02
FitmentWrangler JL 2018+, Gladiator 2020+ (aluminum hoods)
Included Components2 black gas springs + mounting hardware
Extended Length18 inches
Mounting StyleBolt-in, no drilling required

If you value convenience and a clean engine bay, this kit delivers on every front. Most buyers say it’s one of the best simple upgrades they’ve made to their Jeep.

You’ll wonder why Jeep didn’t include gas struts from the factory. The quick-release and dampening features make this a thoughtful, well-designed product that holds up over time.

Quick specs

asinB07SPPXYGY
auto_part_positionFront
best_sellers_rank#26,125 in Automotive (See Top 100 in Automotive) #110 in Automotive Replacement Shock Lift Supports
brand_nameRedline Tuning
colorBlack
customer_reviews4.9 4.9 out of 5 stars (1,066) 4.9 out of 5 stars
extended_length18 inches
included_components(2) Black Gas Springs & black powder-coated mounting hardware
item_highlight(Aluminum Hoods Only), Compatible with Jeep Wrangler JL 2018+ & Jeep Gladiator JT 2020+, All Black Components, Bolt-in
item_weight1.4 pounds
manufacturerRedline Tuning
material_typeAluminum
model21-20003-02
number_of_items1
number_of_packs1
part_number21-20003-02
unit_count1 Count
warranty_descriptionManufacturer warranty for 4 years from date of purchase
Ready to buy?Stock and availability change often.
Check Price on Amazon →

Final verdict

4.9
21-20003-02 Hood Quicklift Fits Jeep

Just buy it if you own a Jeep and want hassle-free hood support—this is a no-brainer upgrade. With a 4.9-star average, owners clearly love the solid build and easy install.

The only hesitation? If your Jeep’s hood has custom aftermarket struts, fitment *might* vary—but that’s rare. Check current stock using the buttons above before it sells out again.

Leave a Comment