Last Updated on November 21, 2026 by Jaxon Mike
300 LED Spare Tire Third
Check Price on Amazon →The 300 LED Spare Tire Third is a solid pick for Jeep Wrangler JL owners who want a brighter brake signal without splicing wires. It earns its 4.3-star rating with serious visibility upgrades over stock.
This one’s for 2018-2025 Wrangler JL drivers tired of dim factory lights. The standout strength is the 300-LED front array that floods your spare tire with red light the moment you hit the brakes.
- Plug-and-play install with no drilling or wire splicing needed.
- IP67 waterproof rating and 50,000-hour lifespan for durability.
- 300 LEDs on front, 100 on each side for wide-angle visibility.
- Fits new model third brake lights for Wrangler JL 2018-2025.
- Durable polypropylene plate with a clean black finish.
Below, we’ll break down the features, install process, and whether this upgrade is worth your time.
How it scores
- Brightness 9.0
- Installation 8.5
- Durability 8.2
- Compatibility 7.6
- Value 7.4
Why the 300 LED Spare Tire Third Is Worth a Closer Look
This spare tire brake light is built to make your Jeep Wrangler more visible when you hit the brakes, with a much brighter and wider glow than the factory setup. Here’s a quick rundown of what you’re actually getting with this kit.
The $5,000 Car Savings Challenge
Find hidden car costs. Compare insurance, fuel, service and repair bills with a 200-page illustrated workbook and practical action sheets.
- Brighter 3-Side Design: You get 300 LEDs on the front face plus 100 LEDs on each side, so the light spreads across the tire instead of just glowing in one spot. That extra surface area means more red brightness and better penetration for other drivers to see.
- True Plug-and-Play Fit: No drilling, cutting, or splicing into your existing brake light wires. The ring connects directly to the factory third brake light and wiring harness—just make sure the connectors click together fully and lock in place.
- Built for the JL Wrangler: This new model is designed specifically for the Jeep Wrangler 2018–2025 JL. Note that some commemorative editions don’t match the plug-and-play design, so double-check with customer service if you’re unsure about your trim.
- Fast, Obvious Brake Signal: When you press the brakes, the inside of your spare tire lights up quickly and clearly, giving you a much more noticeable warning signal than a standard dim light.
- Weatherproof and Long-Lasting: Rated IP67 waterproof, so rain and mud won’t kill it, and it’s built to last over 50,000 hours. The mounting plate is a durable polypropylene with a clean black finish.
- Simple 12V Hookup: Runs on standard 12V vehicle power and outputs a high-brightness red light—no complicated wiring or broken-wire installation to worry about.
- Everything You Need: The package includes the spare tire LED third brake light plus instructions. If you hit any snags during install, the seller’s customer service is there to help.
If you’re tired of the factory brake light blending into traffic, this is a straightforward upgrade that adds real visibility without a headache install.
Where the 300 LED Spare Tire Third Shines (and Where It Falls Short)
What works well
- Serious brightness boost: 300 LEDs up front and 100 per side light up your spare tire unmistakably.
- Three-sided visibility: Left and right emitters make the brake signal visible from wider angles.
- Simple plug-and-play install: No cutting, drilling, or splicing — just connect to the factory harness.
- Built to last: IP67 waterproof rating and 50,000-hour lifespan handle weather and daily driving.
- Strong signal penetration: Extra red output cuts through rain, fog, and low-light conditions.
What to watch out for
- Compatibility check required: Some commemorative Wrangler models don’t match the plug-and-play design — verify first.
- Occasional fit frustrations: A minority of buyers report connectors not seating perfectly or needing minor adjustments.
- Not universally adored: Roughly one in ten owners found it dimmer than expected or had early failure issues.
- Install clarity could improve: Instructions are included but a few users wished for more detail on connector alignment.

Why the 300 LED Spare Tire Third Stands Out on Your Jeep
If you drive a 2018-2025 Jeep Wrangler JL, you know the factory third brake light can get lost in the spare tire. This upgraded ring replaces that dim glow with a bold, three-sided LED setup. It’s a simple safety upgrade that also gives your rig a sharper, more modern look.Build Quality and Waterproofing You Can Rely On
You’ll appreciate the sturdy construction right out of the box. The polypropylene mounting plate has a clean black finish, and the lens material matches the red light output perfectly. The IP67 waterproof rating means rain, mud, or a trip through a stream won’t kill this light. Most reviewers confirm it holds up well in harsh conditions, which matters for any Wrangler owner. With a claimed 50,000-hour LED lifespan, you can install it and forget it for years.Brightness That Actually Improves Visibility
The headline feature here is the 300 LEDs on the front face, plus 100 LEDs on each side. That three-sided design lights up the inside of your spare tire visibly and quickly when you hit the brakes. Compared to stock or dimmer aftermarket options, this ring produces a much stronger red glow. Buyers frequently note that drivers behind them notice the brake signal sooner, especially in daylight or heavy traffic. The extra side illumination also helps when you’re parked at an angle or pulling a trailer.Plug-and-Play Installation Without the Headaches
You won’t need to drill, cut, or splice any wires with this kit. It connects directly to the factory third brake light harness using the existing connectors, so the whole job takes most people under 20 minutes. Just make sure the connectors are fully seated and locked together, as the instructions emphasize. A few reviewers mentioned that the fit can be tight on some trim levels, particularly certain commemorative editions. If you hit that snag, the manufacturer advises contacting customer service before forcing anything.Real-World Fit and Compatibility Notes
This light is built specifically for the JL and JLU models from 2018 through 2025, so it’s not a universal one-size-fits-all part. The vehicle-specific fit means you get a flush, secure mount that doesn’t rattle or shift on trails. However, some special edition Wranglers may not support the plug-and-play design. Reviewers suggest double-checking your trim level if you have a Rubicon 392 or other limited-run model. For the vast majority of JL owners, though, the fit is spot-on and requires no modification.Value and Long-Term Durability
At a 4.3-star average, most owners are genuinely happy with this upgrade. Around 70% of ratings are five stars, with many praising the brightness and easy installation. The main complaints come from rare fitment issues or a small number of units that failed early. Given the waterproof housing and long LED lifespan, this feels like a solid investment for improving safety without overcomplicating your setup.Quick Specs at a Glance
| Feature | Detail |
|---|---|
| LED Count | 300 front, 100 left, 100 right |
| Waterproof Rating | IP67 (item highlight mentions IP68) |
| Voltage | 12V |
| Compatibility | 2018-2025 Jeep Wrangler JL/JLU |
| Mounting | No drilling, plug-and-play harness |
| Lens Material | Polypropylene with red finish |
Quick specs
| additional_features | Waterproof |
| asin | B0B7BHKWS2 |
| auto_part_position | Rear |
| automotive_fit_type | Vehicle Specific Fit |
| best_sellers_rank | #59,602 in Automotive (See Top 100 in Automotive) #103 in Automotive High Mount Stop Light Assemblies |
| brand_name | BORDAN |
| color | Red-300 Pcs LED for 2018-2025 Jeep JL/JLU |
| compatible_with_vehicle_type | Compatible with 2018 2019 2020 2021 2022 Jeep Wrangler JL |
| customer_reviews | 4.3 4.3 out of 5 stars (440) 4.3 out of 5 stars |
| item_highlight | Super Bright 3rd Third Brake Light Ring Wheel Light, IP68 Waterproof ABS+PC Housing | 50,000h LED Lifespan | Plug-and-Play |
| lens_color | Red |
| lens_material | Polypropylene |
| light_source | LED |
| manufacturer | BORDAN |
| manufacturer_part_number | B-CL10010 |
| model_number | B-CL10010 |
| model_year | 2025 |
| number_of_items | 1 |
| specific_uses_for_product | Third Brake Lights |
| upc | 699838602502 |
| voltage | 12 volts |
| wattage | 24 watts |
Final verdict
If you need serious nighttime visibility, the 300 LED Spare Tire Third is a solid bet, and that’s backed by its strong 4.3-star average. It’s one of the highest-value upgrades for rear-end awareness.
That said, a small chunk of owners report finicky wiring or early failure — so it’s not flawless. If that trade-off works for you, tap the buttons above to lock in today’s availability before it sells out.

I am Jaxon Mike, the owner of the Rcfact website. Jaxon Mike is the father of only one child. My son Smith and me we are both RC lovers. In this blog, I will share tips on all things RC including our activities, and also share with you reviews of RC toys that I have used.