Last Updated on November 21, 2026 by Jaxon Mike
New Upgrade Smoke Lens LED
Check Price on Amazon →The New Upgrade Smoke Lens LED is a solid pick for Jeep owners wanting a cleaner, brighter front end. It earns its 4.4-star reputation with a simple swap and big visual payoff.
This kit is built for JL and JT owners with the dual-halogen setup—think Sahara, Rubicon, or Overland trims. The standout strength is the all-in-one design that bundles sequential turn signals, DRLs, and side markers into one package.
- Includes turn signals and side markers in one kit.
- Sequential amber flashing with a smoked gloss finish.
- Fits select 2018-2024 Jeep JL and Gladiator JT models.
- Replaces stock 6-wire dual-halogen fender lights only.
- Brighter LED output using 135 high-intensity chips.
We’ll walk through fitment details, lighting performance, and the smoked look so you can decide if these are right for your rig.
How it scores
- Brightness 8.8
- Styling 8.6
- Fitment Ease 7.8
- Build Quality 8.2
- Value 7.6
What Makes the New Upgrade Smoke Lens LED a Smart Swap for Your Jeep
This all-in-one LED kit replaces your factory halogen fender lights with a smoked-lens setup that bundles turn signals, daytime running lights, and side markers into a single package. It’s built specifically for certain JL Wrangler and JT Gladiator trims, so double-check your vehicle before ordering.
- All-in-one design: Each side includes the sequential turn signal, daytime running light, and side marker light in one unit, so you don’t need to buy the marker lights separately.
- Smoked sequential signals: The smoked gloss finish pairs with a sequential amber flash for turn signals, while the daytime running light runs white — a clean, modern look for your fenders.
- Bright LED output: The lights use 36 high-intensity LEDs (0.5W each) plus 99 smaller LEDs (0.2W each) to deliver strong illumination at 12V DC, powered by durable ABS plastic housing.
- Precise fitment check: This kit is only for 2018–2024 Jeep Wrangler JL and 2020–2023 Gladiator JT models that originally came with dual halogen bulbs — one for DRL/small light and one for turn signal — in the 6-wire, 8.8″ x 8.27″ x 6.4″ configuration.
- Not for all trims: The kit won’t fit Sport models (which use a single halogen bulb for both DRL and turn signal) or factory LED fender light setups on higher trims — the listing points to separate ASINs for those versions.
- Two lights included: The package ships with two LED turn signal lights and two LED side marker lights, giving you everything needed for both front fenders.
- Programming note: Some vehicles may require using JScan, Tazer Mini, or BCM programming to enable the LED DRL function after installation — worth planning for before you start.
What Buyers Love and What Trips Them Up
What works well
- All-in-one kit — includes sequential turn signals and side markers, no extras needed.
- Sequential flashing style — adds a modern, smoked look that upgrades the Jeep’s appearance.
- Bright LED output — high-intensity chips make DRL and turn signals clearly visible.
- Better than OEM halogen — more features and brighter performance in one package.
- Durable ABS build — solid construction designed to handle road wear and weather.
What to watch out for
- Fitment is picky — only works with 6-wire, dual-halogen JL/JT models; verify first.
- Programming may be needed — some rigs require JScan or Tazer to enable LED DRL.
- Not for Sport models — single-bulb halogen setups need a different product version.
- Smoked lens trade-off — darker look may reduce light output slightly in some conditions.

How the New Upgrade Smoke Lens LED Performs in Real Use
First Impressions: Build Quality and the Smoked Look
The smoked gloss finish gives your Jeep a sleeker, more aggressive front end. You get that custom appearance without painting or modifying anything. If you like the smoked look, our review of smoked LED tail lights for the JK shows a similar style upgrade.
These lights are made from durable ABS plastic, and the housing feels solid in hand. Most buyers say the dark lens looks even better once installed.
You won’t need to buy side markers separately. This all-in-one kit includes both LED turn signals and LED side marker lights.
Fitment: Check Your Jeep’s Configuration First
This kit only works on JL and JT models with dual halogen bulbs (one for DRL, one for turn signal). It will not fit Sport models or trucks with factory LED fender lights.
You need the 6-wire version with the 8.8″ x 8.27″ x 6.4″ housing. The manufacturer lists specific trim levels, so double-check your vehicle before ordering.
Reviewers who confirmed fitment report a direct swap with no cutting or splicing. If you have a different configuration, you’ll need a different ASIN.
Brightness and Sequential Turn Signal Performance
With 36 high-intensity LED chips for the turn signal and 99 for other functions, you get a noticeable upgrade over stock halogen output. The white daytime running light is crisp and clean.
The sequential amber turn signal sweeps in the direction you’re turning, which adds a modern touch. Reviewers say it’s bright enough to see clearly in direct sunlight.
The $5,000 Car Savings Challenge
Find hidden car costs. Compare insurance, fuel, service and repair bills with a 200-page illustrated workbook and practical action sheets.
Smoke lenses do slightly reduce raw brightness, but the LED output compensates. Most owners feel the trade-off is worth it for the styling.
Installation and Programming: What to Expect
Physical installation is straightforward for most DIYers. However, you may need to program your Jeep’s BCM to recognize LED lights.
Use JScan with an OBD adapter or a Tazer Mini to set “Fender DRL Type” to LED. Without this step, you may get dashboard warnings or rapid flashing.
Some buyers report plug-and-play success on newer models. Others note that the programming step was necessary, so keep that in mind before you start.
Waterproof construction means you don’t need to worry about rain or car washes. The sealed housing protects the LED boards from moisture.
Value and Real-World Owner Sentiment
Owners rate this upgrade at 4.4 stars, with most praising the appearance and brightness. The combination of DRL, turn signal, and side marker in one package simplifies the upgrade.
Reviewers consistently mention the stylish smoked look as the main reason to buy. They also note that it’s more affordable than buying separate components.
Some negative feedback focuses on fitment confusion and the programming requirement. Reading the compatibility notes carefully will save you the headache.
| Specification | Detail |
|---|---|
| Brand | LX-LIGHT |
| Lens Color | Dark Smoke |
| Housing Material | ABS Plastic |
| Light Source | LED (0.5W x 36 + 0.2W x 99) |
| Water Resistance | Waterproof |
| Kit Includes | 2 turn signals + 2 side markers |
If your Jeep matches the fitment list, this is a solid visual upgrade. Just plan for the BCM programming step, and you’ll be happy with the result. For a matching rear upgrade, our plug-and-play spare tire light review covers a similar easy install.
Quick specs
| additional_features | Waterproof |
| asin | B0B7X7HTKR |
| auto_part_position | Front Outer |
| automotive_fit_type | Vehicle Specific Fit |
| best_sellers_rank | #62,686 in Automotive (See Top 100 in Automotive) #147 in Automotive Side Marker Light Assemblies |
| brand_name | LX-LIGHT |
| color | Dark Smoke |
| compatible_with_vehicle_type | Only fit for OE Dual halogen bulbs: one for DRL/small light, one for turn signal. Compatible with Jeep Wrangler JL JL Sahara 2018–2023 ; JL Rubicon 2018-2024 ; JL 80th Anniversary 2021-2023 ; JL North Edition 2020-2021 ; JL Willys ( except Sport Willys ) 2022-2024 ; Compatible with Jeep Gladiator JT Overland 2020–2023 ; JT Rubicon 2020-2023 ; JT 80th Anniversary 2021-2022 ; JT Willys ( except Sport Willys ) 2022-2024. |
| customer_reviews | 4.4 4.4 out of 5 stars (201) 4.4 out of 5 stars |
| lens_color | Smoke |
| lens_material | Abs,Plastic |
| light_source | LED |
| manufacturer | LX-LIGHT |
| manufacturer_part_number | LXDTDRLL |
| model_number | LXDTDRLL |
| model_year | 2018 |
| number_of_items | 2 |
| number_of_packs | 2 |
| set_name | 4-pack |
| specific_uses_for_product | turn signal light |
| unit_count | 4 Count |
| voltage | 12 volts_of_direct_current |
| wattage | 40 watts |
Final verdict
If you want brighter, sharper visibility without the harsh white light, the New Upgrade Smoke Lens LED is a solid pick — and the 4.4-star buzz backs that up. It’s a straightforward upgrade that delivers on its main promise.
Just know the smoke tint can cut output slightly in super dark spots, so don’t expect miracles. If that trade-off works for you, hit the buttons above to grab one while stock lasts.

I am Jaxon Mike, the owner of the Rcfact website. Jaxon Mike is the father of only one child. My son Smith and me we are both RC lovers. In this blog, I will share tips on all things RC including our activities, and also share with you reviews of RC toys that I have used.