How to Change Gotrax Scooter to MPH: Easy Conversion Guide

Last Updated on October 1, 2025 by foysal islam

Riding a Gotrax scooter can be an exhilarating experience, but sometimes you may want a little more speed to really get the adrenaline pumping. If you’re the type of person who’s always seeking that extra bit of power and performance, you’re in luck – it’s actually quite easy to convert your Gotrax scooter to display the speed in miles per hour (MPH) rather than the default kilometers per hour (KPH). In this comprehensive guide, I’ll walk you through the simple steps to make this modification and unlock a whole new level of scooter fun.

Why Convert to MPH?

There are a few key reasons why you might want to change your Gotrax scooter’s speed readout from KPH to MPH:

• Better Alignment with U.S. Standards: Most people in the United States are more familiar with miles per hour as the standard unit of measurement for speed. Converting to MPH will make it easier to gauge your speed and understand how fast you’re really going.
• Increased Perceived Performance: Let’s be honest – seeing a higher number on your speedometer can make you feel like you’re going faster, even if the actual speed is the same. This little psychological boost can make your rides feel more exhilarating.
• Easier Speed Comparisons: If you ever want to compare your Gotrax scooter’s performance to other vehicles or devices that use MPH, the conversion to miles per hour will make that process much simpler.

Step-by-Step Guide to Changing to MPH

Ready to make the switch? Here’s how you can convert your Gotrax scooter’s speed display to MPH:

Gather the Necessary Tools

Before you get started, make sure you have the following items on hand:

• Gotrax scooter
• Small Phillips-head screwdriver
• Needle-nose pliers (optional)

Access the Control Panel

First, you’ll need to locate the control panel on your Gotrax scooter. This is typically found on the handlebars, either on the right or left side. Carefully remove the panel cover by unscrewing the Phillips-head screws that hold it in place.

Locate the Speed Setting

Once you’ve accessed the control panel, you should see a series of buttons, switches, and other components. Look for a setting that is labeled “Speed” or “Unit.” This is the section you’ll need to adjust to change the speed display from KPH to MPH.

Make the Conversion

Depending on your specific Gotrax model, the process for changing the speed setting may vary slightly. However, the general steps are as follows:

1. Locate the “Speed” or “Unit” setting button or switch.
2. Toggle the button or switch to the “MPH” or “Miles” setting.
3. Reassemble the control panel cover and secure it in place with the screws.

In some cases, you may need to use the needle-nose pliers to gently manipulate the switch or button if it’s a bit stuck. Just be careful not to apply too much force and damage any of the delicate components.

Test and Confirm the Change

Once you’ve completed the conversion, take your Gotrax scooter for a spin and check the speed display. It should now be showing your speed in miles per hour instead of kilometers per hour. If everything looks good, you’re all set to enjoy your scooter with the new MPH readout!

Conclusion

Changing your Gotrax scooter’s speed display from KPH to MPH is a simple process that can greatly enhance your riding experience. By aligning the readout with the more familiar U.S. standard, you’ll be able to better gauge your speed, compare your performance, and even get a little psychological boost from seeing a higher number on the display. Follow the steps outlined in this guide, and you’ll have your Gotrax scooter converted to MPH in no time. Happy riding!

FAQs

Will this modification affect my scooter’s performance?

No, converting the speed display from KPH to MPH will not have any impact on your Gotrax scooter’s actual performance or speed capabilities. It’s simply a visual change to the readout on the control panel.

Can I revert the change back to KPH if I want to?

Absolutely! The process to change the speed display is reversible, so you can easily switch it back to KPH if you prefer. Just follow the same steps outlined in the guide, but toggle the setting back to the “KPH” or “Kilometers” option.

Do I need any special tools or skills to make this modification?

No, the conversion process is relatively straightforward and only requires a few basic tools like a small Phillips-head screwdriver. As long as you’re comfortable accessing the control panel and making minor adjustments, you should be able to complete the change without any special skills or expertise.

Will this void my Gotrax scooter’s warranty?

Changing the speed display from KPH to MPH is a simple and reversible modification, so it should not void your Gotrax scooter’s warranty. However, it’s always a good idea to check with the manufacturer or your specific warranty terms to be sure.

How accurate will the MPH readout be compared to the original KPH display?

The MPH readout should be just as accurate as the original KPH display, as the conversion is based on the scooter’s internal speed sensor and calculations. You can expect the MPH display to provide a reliable and precise representation of your actual speed.