Last Updated on September 30, 2025 by foysal islam
As the proud owner of a Hover 1 scooter, you’ve probably grown to love the convenience and fun it brings to your daily commute or leisure rides. But, like any vehicle, your scooter will eventually need some maintenance – and one of the most common tasks is changing a flat tire. Don’t worry, though! With the right tools and a bit of know-how, you can have your Hover 1 back on the road in no time.
Gather Your Supplies
Before you get started, make sure you have all the necessary tools and materials on hand. You’ll need:
- A replacement tire that’s the correct size for your Hover 1 model
- A tire lever or two (to help pry the tire off the rim)
- A pump or air compressor (to inflate the new tire)
- A wrench or socket set (to remove the axle bolt)
- A clean, flat surface to work on
Safely Remove the Old Tire
Now, let’s get to work! First, make sure your Hover 1 is turned off and parked on a level surface. Engage the rear brake to keep the scooter steady as you work.
Step 1: Loosen the Axle Bolt
Using your wrench or socket set, loosen the axle bolt that secures the wheel to the scooter. Don’t remove it completely just yet – you’ll need it to stay in place for now.
Step 2: Deflate the Tire
Use the valve stem to let all the air out of the tire. This will make it easier to remove the tire from the rim.
Step 3: Pry the Tire Off
Carefully insert the tire lever under the lip of the tire and pry it off the rim. Work your way around the entire tire, using a second lever if needed, until the tire is completely detached.
Install the New Tire
With the old tire removed, it’s time to put the new one on. This process is similar to taking the old one off, just in reverse.
Step 1: Seat the Tire on the Rim
Start by placing the new tire on the rim, making sure the valve stem is aligned correctly. Use your hands and the tire levers to work the tire onto the rim, being careful not to damage the new tube.
Step 2: Inflate the Tire
Once the tire is seated, use your pump or air compressor to inflate it to the recommended PSI, which you can find in your Hover 1 owner’s manual or on the tire sidewall.
Step 3: Secure the Wheel
Finally, tighten the axle bolt back into place, ensuring the wheel is securely attached to the scooter. Double-check that everything is tight and secure before taking your Hover 1 for a spin.
Conclusion
Changing a tire on your Hover 1 scooter may seem daunting at first, but with the right tools and a bit of practice, it’s a task you can easily handle on your own. By following these simple steps, you’ll have your scooter back on the road in no time, saving you the hassle and expense of a trip to the repair shop. Happy riding!
FAQs
How often should I check the tire pressure on my Hover 1 scooter?
It’s a good idea to check the tire pressure on your Hover 1 scooter at least once a month, or before any long rides. Properly inflated tires will not only improve the performance and handling of your scooter, but they’ll also help prevent flats and prolong the life of the tires.
Can I use a different size tire on my Hover 1 scooter?
No, it’s important to use a replacement tire that is the same size as the original. Using a tire that is too small or too large can affect the handling and stability of your scooter, and may even be unsafe. Always refer to your owner’s manual or the specifications on the original tire to ensure you get the right replacement.
What should I do if I get a flat tire while riding?
If you get a flat tire while out on the road, the best thing to do is to stop riding immediately and assess the situation. If you have the necessary tools and a spare tire, you can change the tire right then and there. However, if you’re not prepared or don’t feel comfortable doing the repair, it’s best to call for a ride or have the scooter towed to a repair shop.
How can I prevent flats on my Hover 1 scooter?
There are a few things you can do to help prevent flats on your Hover 1 scooter. First, always keep the tires properly inflated to the recommended PSI. Second, avoid riding over sharp objects or through areas with a lot of debris. And finally, consider investing in puncture-resistant tires or tire sealant to help reduce the risk of flats.
Do I need any special tools to change the tire on my Hover 1 scooter?
The basic tools needed to change a tire on a Hover 1 scooter are a tire lever, a wrench or socket set, and a pump or air compressor. Some models may also require additional tools, so it’s always a good idea to refer to your owner’s manual or contact the manufacturer for specific guidance on the recommended tools for your scooter.

I am Jaxon Mike, the owner of the Rcfact website. Jaxon Mike is the father of only one child. My son Smith and me we are both RC lovers. In this blog, I will share tips on all things RC including our activities, and also share with you reviews of RC toys that I have used.