How to Change the Tire on Your Ninebot Scooter in Easy Steps

Last Updated on September 30, 2025 by foysal islam

As the proud owner of a Ninebot scooter, you know the thrill of zipping around town on this compact and efficient mode of transportation. But just like any vehicle, your scooter will eventually need some maintenance—and one of the most common tasks is replacing a worn-out tire. Don’t worry, changing a Ninebot tire is actually a straightforward process that you can easily handle yourself. In this comprehensive guide, I’ll walk you through the steps to get your scooter back on the road in no time.

Gather Your Tools

Before we dive in, make sure you have the necessary tools and supplies on hand. You’ll need:

• A new tire that’s the correct size for your Ninebot model
• A tire lever or two (to help pry the tire off the rim)
• A valve stem tool (to remove the old valve stem)
• A pump or compressor to inflate the new tire
• A wrench or socket set to remove the wheel

With everything ready to go, let’s get started!

Step 1: Disconnect the Wheel

First, you’ll need to remove the wheel from your Ninebot scooter. This typically involves loosening a few bolts or screws. Consult your owner’s manual for the specific instructions for your model, as the process may vary slightly.

Tip: Take a photo of the wheel assembly before you start so you can remember how it all goes back together.

Step 2: Deflate the Tire

Once the wheel is off, use the valve stem tool to remove the valve stem and let all the air out of the tire. This will make it much easier to pry the tire off the rim.

Step 3: Remove the Old Tire

Now for the tricky part—using the tire levers, carefully work the tire off the rim. Start on the opposite side of the valve stem and work your way around, being careful not to damage the rim. It may take some elbow grease, but the tire should eventually pop off.

Tip: Apply a little soapy water to the tire bead to help it slide off more easily.

Step 4: Install the New Tire

With the old tire removed, it’s time to put the new one on. Start by aligning the valve stem with the hole in the rim, then use your hands and the tire levers to work the tire bead over the rim. Make sure the tire is seated properly all the way around before moving on.

Tip: Inflate the tire to the recommended PSI listed on the sidewall, then deflate it slightly to make the final installation easier.

Step 5: Inflate the Tire

Once the new tire is in place, use your pump or compressor to inflate it to the proper PSI. Check the tire sidewall or your owner’s manual for the recommended inflation pressure.

Step 6: Reinstall the Wheel

With the tire all set, it’s time to put the wheel back on your Ninebot scooter. Refer to your earlier photo and simply reverse the steps you took to remove the wheel in the first place.

Tip: Double-check that all the bolts or screws are tight and secure before taking your scooter for a spin.

Conclusion

There you have it—a straightforward guide to changing the tire on your Ninebot scooter. By following these simple steps, you can save yourself the hassle and expense of taking your scooter to a repair shop. Plus, you’ll have the satisfaction of doing it yourself. Just remember to take your time, have the right tools on hand, and you’ll have your Ninebot back on the road in no time. Happy riding!

FAQs

How often should I change the tire on my Ninebot scooter?

The frequency of tire changes will depend on factors like how often you use your scooter, the terrain you ride on, and your riding style. As a general rule, it’s a good idea to inspect your tires regularly and replace them when they show significant wear or damage. Most manufacturers recommend changing the tires every 6-12 months or when the tread depth gets below 2-3 millimeters.

Can I use a different size tire on my Ninebot scooter?

No, it’s important to use a tire that’s the correct size for your Ninebot model. Using a tire that’s too small or too large can affect the handling and stability of your scooter, potentially leading to unsafe riding conditions. Always refer to your owner’s manual or check with the manufacturer to ensure you get the right replacement tire.

How do I dispose of the old tire?

Most tire shops or auto parts stores will accept old tires for proper disposal or recycling. You can also check with your local municipal waste management department to see if they have any special programs or drop-off locations for used tires. Avoid putting the old tire in your regular household trash, as it may not be accepted by your garbage collection service.

Can I repair a punctured tire on my Ninebot scooter?

In some cases, you may be able to repair a small puncture in your Ninebot tire using a tire repair kit. However, it’s generally best to replace the tire if it has sustained significant damage or wear. Attempting to repair a tire that’s in poor condition could compromise the safety and handling of your scooter. When in doubt, it’s always better to err on the side of caution and install a new tire.

Do I need any special tools to change the tire on my Ninebot scooter?

The basic tools required to change a Ninebot tire are a tire lever, a valve stem tool, and a pump or compressor. You may also need a wrench or socket set to remove the wheel from the scooter. Most of these items can be found at your local hardware store or auto parts shop. If you’re unsure what specific tools you need, refer to your Ninebot’s owner’s manual or contact the manufacturer for guidance.