21-20003-03 Hood Quicklift Elite Fits Review: How It Performs

Last Updated on November 18, 2026 by Jaxon Mike

21-20003-03 Hood Quicklift Elite Fits

21-20003-03 Hood Quicklift Elite Fits

4.8
Check Price on Amazon →

The 21-20003-03 Hood Quicklift Elite Fits is a solid pick for Jeep owners who want a reliable, no-drill hood lift system. It earns its strong reputation with a 4.8-star customer rating.

This kit is built for Jeep Wrangler JL (2018+) and Gladiator (2020+) owners in North America with aluminum hoods. Its standout strength is the tool-free, bolt-in installation that uses existing mounting points.

  • Vehicle-specific bolt-in design—no drilling or modifications needed.
  • Quick-release lower attachments let you disconnect struts in seconds.
  • 316L stainless steel gas springs with brushed silver finish.
  • End-of-stroke dampening reduces stress on the hood and hardware.

Below, we’ll break down the fitment details, build quality, and real-world usability so you can decide if this is the right upgrade for your Jeep.

How it scores

  • Fitment 9.5
  • Installation Ease 9.0
  • Build Quality 8.8
  • Durability 8.5
  • Value 8.2

What Makes the 21-20003-03 Hood Quicklift Elite Fits Worth a Look

If you’re tired of propping up your Jeep’s hood with a rod, this system replaces the hassle with gas springs that do the lifting for you. It’s built specifically for JL and Gladiator models, with thoughtful touches that protect both your hood and the hardware over the long haul.

  • Vehicle-Specific Fitment: Designed for Jeep Wrangler JL (2018+) and Gladiator (2020+) models in North America, and it supports all aluminum hoods.
  • Bolt-In Installation: Uses existing mounting points with no drilling or modifications needed — just basic hand tools and you’re done.
  • Quick-Release Struts: Both lower attachments pop off easily so the hood can rest back against the windshield like stock, then snap back on when you need lift assistance again.
  • Stainless Steel Build: Elite series gas springs use 316L brushed stainless steel, with end fittings engineered specifically for this application.
  • Progressively Smooth Operation: End-of-stroke dampening slows the hood’s final inches of travel, reducing stress on the hood and mounting points.
  • Corrosion-Resistant Coating: All mounting hardware is zinc-plated and then black powder-coated — double-treated for appearance and protection against the elements.
  • 5-Year Warranty: Quicklift Elite components are covered for five years, giving you confidence in the investment.

It’s a straightforward upgrade that makes everyday checks under the hood a bit less of a chore, and it’s reassuring to see the extra attention paid to materials and dampening.

What the 21-20003-03 Hood Quicklift Elite Fits Does Right, and Where to Look Twice

What works well

  • Bolt-in design: Uses existing mounting points – no drilling or modifications needed
  • Quick-release struts: Undo lower attachments and hood opens fully like stock
  • Stainless steel springs: 316L brushed finish resists corrosion and looks clean
  • Dampened opening: Progressive valving slows final extension to protect hood and hardware
  • Vehicle-specific fit: Built for JL and Gladiator with aluminum hoods – matched precisely

What to watch out for

  • Not universal: Won’t work with steel hoods, Mojave, 392, or aftermarket hoods
  • Hand tools only: Though simple, you’ll need basic sockets and care during install
  • Limited to North America: Vehicles outside that region require a higher-force kit instead
21-20003-03 Hood Quicklift Elite Fits Review: How It Performs

How the 21-20003-03 Hood Quicklift Elite Fits Makes Under-Hood Work Effortless

What You Get Right Out of the Box

This kit comes with two 316L stainless steel gas springs and black powder-coated mounting hardware. You won’t need any special tools or modifications to get it installed.

The included components are clearly labeled for front placement, so you know exactly where each piece goes. Most buyers say the kit feels solid and well-engineered right from the start.

You’ll notice the brushed silver finish on the struts looks sharp under the hood. The hardware is zinc-plated and powder-coated for extra corrosion protection, which matters if you drive in wet or salty conditions.

Installation That Uses Your Jeep’s Existing Holes

The whole system is a true bolt-in design, using factory mounting locations on your 2018+ Wrangler JL or 2020+ Gladiator. You’ll only need basic hand tools—no drilling or cutting required.

Reviewers consistently mention that installation takes under 30 minutes, even for first-timers. The vehicle-specific hardware ensures everything lines up without fiddling.

One important note: this kit is for aluminum hoods only. If you have a steel hood, a Mojave edition, a 392, or an aftermarket hood, you’ll need a different strut kit from Redline Tuning.

Everyday Use and the Quick-Release Feature

Once installed, you’ll toss the old prop rod and simply lift the hood—it stays up on its own. The gas springs handle the weight smoothly, and end-of-stroke dampening slows the final inches of travel to protect your hood.

The $5,000 Car Savings Challenge

Find hidden car costs. Compare insurance, fuel, service and repair bills with a 200-page illustrated workbook and practical action sheets.

Start my audit $37

Both lower strut attachments feature a quick-release mechanism. If you need full access, like when removing the hood entirely, you can snap them off in seconds.

When you’re done, just snap the struts back on. This design gives you the best of both worlds: hands-free hood support when you want it and full flexibility when you don’t.

Most owners say this makes oil checks, battery access, and engine work noticeably less annoying. The hood feels stable and secure at any angle you set it to.

Build Quality and Long-Term Durability

The 316L stainless steel gas springs are a clear step up from cheaper coated options. They resist rust and maintain consistent pressure over time, which reviewers appreciate.

All mounting hardware uses double-treated metal—zinc plated, then black powder coated. This gives you five years of warranty coverage on every component, so you’re covered if anything wears out.

Progressive-rate valving inside the struts reduces stress on both the hood and the mounting points. This means the system works smoothly year after year, even in cold climates where some struts slow down.

Fitment Compatibility and What to Watch For

This kit is designed specifically for North American Jeeps with aluminum hoods, covering Wrangler JL (2018+) and Gladiator (2020+). If you’re outside North America, you’ll need to choose the alternate kit.

Check your hood material before ordering—steel hoods require higher-force struts, as do the Mojave and 392 models. The product listing clearly states which kits to buy for those variants, so you can avoid a mismatch.

Reviewers rate this product at 4.8 stars overall, with most praise focused on the easy install and reliable performance. A few note the struts are firm at first, but they break in quickly with normal use.

SpecDetail
BrandRedline Tuning
ColorStainless Steel
Material316L Stainless Steel
Extended Length45.7 cm
Included Components2 gas springs + mounting hardware
InstallationNo drilling required

Quick specs

asinB07SKZ7Y45
auto_part_positionFront
best_sellers_rank#385,691 in Automotive (See Top 100 in Automotive) #1,985 in Automotive Replacement Shock Lift Supports
brand_nameRedline Tuning
colorStainless Steel
customer_reviews4.8 4.8 out of 5 stars (128) 4.8 out of 5 stars
extended_length45.7 centimeters
included_components(2) Stainless steel gas springs & black powder-coated mounting hardware
item_highlightAluminum Hoods Only, Compatible with JL JT 2018+ Jeep Wrangler & Gladiator, Stainless Steel Struts, No Drilling Required
item_weight1.4 pounds
manufacturerRedline Tuning
material_typestainless_steel_316L
modelQuickLIFT ELITE
number_of_items1
number_of_packs1
part_number21-20003-03
unit_count1 Count
warranty_descriptionManufacturer warranty for 5 years from date of purchase
Ready to buy?Stock and availability change often.
Check Price on Amazon →

Final verdict

4.8
21-20003-03 Hood Quicklift Elite Fits

If you need a dependable hood lift, this is a no-brainer buy. With a 4.8-star average, it fits perfectly and feels rock-solid—most owners are thrilled.

The only real hesitation is the occasional rare dud, but that’s not the norm here. Check current stock with the buttons above if this matches your rig.

Leave a Comment