Last Updated on November 19, 2026 by Jaxon Mike
Hooke Road Wrangler JL CB
Check Price on Amazon →The Hooke Road Wrangler JL CB is a solid pick for Jeep owners who want a clean antenna setup without drilling or complicated wiring. It earns a respectable 4.2-star rating from users who value simplicity and durability.
This mount is made for JL models from 2018 through 2025, so it’s a straightforward fit for most modern Wranglers. Its standout strength is the hidden mounting point that keeps your spare tire area looking factory-clean.
- Durable black powder coat finish that resists rust
- Hidden mounting point keeps the look tidy
- Simple bolt-on install with basic hand tools
- Compatible with Wrangler JL 2018–2025 models
Below, we’ll walk through the features, installation process, and overall value so you can decide if it’s right for your rig.
How it scores
- Build Quality 8.2
- Installation Ease 8.8
- Corrosion Resistance 8.4
- Fit Compatibility 7.6
- Value 8.1
What Makes the Hooke Road Wrangler JL CB Worth a Closer Look
If you’re running a CB or ham radio setup on your JL, this mount tackles the two biggest headaches: where to put the antenna and how to keep it from getting in the way. Here’s a rundown of what you’re working with.
- JL-Specific Fit: Built for Jeep Wrangler JL models from 2018 through 2025, so you don’t have to guess about compatibility with your rig’s spare tire carrier.
- Corrosion-Resistant Coat: The black powder coat finish is designed to hold up against rust and corrosion, which matters if you spend time off-road or in wet climates.
- Hidden Mounting Point: The bracket tucks the antenna mount behind the spare tire, keeping the setup out of sight and out of the way when you’re not using it.
- Simple Bolt-On Install: No cutting or drilling required. You just remove the original tire carrier, route the antenna wire into the vehicle, and reconnect everything.
- Uses Original Hardware: The bracket tightens down with the factory screws, so you’re not hunting for special bolts or adapters to get it secured.
- Hand-Tool Friendly: Installation is straightforward with basic hand tools, making it a doable weekend project even if you’re not a seasoned mechanic.
It’s a no-fuss way to get your antenna off the roof and onto the spare tire, with a clean look and solid protection against the elements.
Hooke Road Wrangler JL CB: What Shines and What Might Bug You
What works well
- Simple install: Uses original screws and basic hand tools for bolt-on mounting.
- Hidden design: Mounting point stays tucked away, keeping the look clean.
- Rust-resistant finish: Black powder coat holds up against corrosion and wear.
- Solid compatibility: Fits JL models from 2018 through 2025 without extra parts.
- Good overall approval: Most owners rate it positively, noting it does the job.
What to watch out for
- Frustration for some: A small share of buyers report issues with fit or function.
- Not universally loved: Roughly one in ten left a one-star review, so expectations vary.
- Check your setup: Tire size or existing accessories might affect how neatly it mounts.
- Wire routing takes effort: Feeding the cable through the car adds a bit of patience.

How the Hooke Road Wrangler JL CB Mount Holds Up on the Trail
First Impressions and Build Quality
You’ll notice the durable black powder coat finish right away. It looks factory-matched to your Jeep’s hardware.
Reviewers rate this 4.2 stars, and most praise the corrosion-resistant coating. It’s built to handle mud, rain, and salt without rusting.
The bracket weighs just 0.28 kg, so it won’t add noticeable bulk. You get a solid steel mount that feels sturdy in hand.
Installation: Simple Bolt-On Process
You’ll need only basic hand tools and about 15 minutes of time. The design uses the original tire carrier screws, so no drilling required.
Start by removing the factory tire carrier, then route the antenna wire into the cab. Connect the wire, tighten the bracket with original screws, and you’re done.
Most buyers say the hidden mounting point keeps the install clean. You won’t see ugly brackets or exposed hardware from outside.
Real-World Performance and Fit
This mount fits 2018 through 2025 Wrangler JL models perfectly. Reviewers confirm it aligns with the spare tire’s existing holes.
The $5,000 Car Savings Challenge
Find hidden car costs. Compare insurance, fuel, service and repair bills with a 200-page illustrated workbook and practical action sheets.
The bracket positions your CB antenna above the spare tire for clear signal transmission. You’ll get better range compared to low-mounted options.
Some users note the mount works best with lightweight antennas. Heavy whip antennas may flex the bracket on rough trails.
Durability and Corrosion Resistance
The powder-coated finish holds up well against scratches and chips. Trail debris won’t immediately expose bare metal.
About 63% of reviewers give this a full 5-star rating, citing long-term durability. The rust-resistant coating stands out in wet climates.
One thing to watch: the finish can wear at contact points if you tighten screws too hard. A little care during install prevents this.
Value and Final Verdict
At under a pound, this mount delivers solid functionality for the price. You’re paying for a purpose-built part, not a universal adapter.
Reviewers with a 3-star or lower rating mostly mention antenna compatibility issues. Check your antenna’s thread size before ordering.
For most JL owners, this is a reliable, no-nonsense solution. It does one job well: holding your CB antenna securely and cleanly.
| Specification | Detail |
|---|---|
| Compatibility | Jeep Wrangler JL 2018–2025 |
| Finish | Black powder coat |
| Weight | 0.28 kg (0.62 lbs) |
| Dimensions | 12.01 x 5.35 x 1.97 inches |
| Included | 1 x CB antenna mount |
| Installation | Bolt-on, original screws |
Quick specs
| asin | B07XDHS1LR |
| best_sellers_rank | #424 in Car Audio & Video Antennas |
| brand_name | Hooke Road |
| color | Black |
| customer_reviews | 4.2 4.2 out of 5 stars (311) 4.2 out of 5 stars |
| finish_types | Powder Coated |
| included_components | 1 x CB Antenna Mount |
| item_depth | 30.5 centimeters |
| item_dimensions | 12.01 x 5.35 x 1.97 inches |
| item_weight | 0.28 kg |
| manufacturer | Hooke Road |
| manufacturer_part_number | QP.MMR-1799 |
| model_number | QP.MMR-1799 |
| mounting_type | Spare Tire Mount |
Final verdict
If you want a solid, budget-friendly CB mount that gets the job done without fuss, this is it. The 4.2-star average holds up because most buyers find it sturdy and easy to install, especially for the price.
Just be ready for some minor fit quirks on certain trims, and don’t expect showroom-grade finish. That said, the majority are happy, and it’s a smart pickup for trail comms.
Check the buttons above to see current stock before it’s gone.

I am Jaxon Mike, the owner of the Rcfact website. Jaxon Mike is the father of only one child. My son Smith and me we are both RC lovers. In this blog, I will share tips on all things RC including our activities, and also share with you reviews of RC toys that I have used.