Last Updated on November 18, 2026 by Jaxon Mike
Nilight Spare Tire Brake Light
Check Price on Amazon →The Nilight Spare Tire Brake Light is a smart, straightforward upgrade for Jeep Wrangler owners who want extra visibility without overcomplicating things. It earns its 4.5-star reputation with a simple install and bright signal.
This one’s built for 2007-2018 JK/JKU models with 16 to 20-inch wheels, and it’s ideal if you’re tired of a dim third brake light. The standout strength is the 85-LED array that delivers a clear, immediate warning to drivers behind you.
- Works as a third brake light and rear decoration.
- Fits JK/JKU models with 16-20 inch rims and listed lug patterns.
- 85 quality LEDs rated for up to 30,000 hours.
- Install by removing tire, wiring to brake light, replacing tire.
- Package includes one spare tire brake light unit.
Below, we’ll walk through the fitment details, install steps, and overall pros and cons to help you decide.
How it scores
- Brightness 9.0
- Ease of Install 8.5
- Durability 8.3
- Value 8.8
- Fitment 7.8
What Makes the Nilight Spare Tire Brake Light a Smart Upgrade for Your Jeep
If you drive a Jeep Wrangler JK or JKU from 2007 to 2018, this spare tire brake light pulls double duty — it gives you a clear, high-mounted brake signal and adds a clean look to your rear setup. Here’s a closer look at the features that matter most.
- Dual function design: Works as your third brake light while also serving as a stylish decoration for the spare tire area, so you get improved visibility and a finished appearance in one piece.
- Broad fitment coverage: Designed to fit Jeep Wrangler 2007-2018 JK/JKU models with 16 to 20 inch rim diameters, and compatible with 5×5, 5×4.5, and 5×5.5 inch lug patterns.
- 85 bright LEDs: Uses 85 quality LED chips that produce a high-output red light, making your braking signal obvious to drivers behind you without any lag.
- Long service life: Rated for up to 30,000 hours of use, so this brake light is built to keep working reliably well beyond typical road life.
- Straightforward install: Simply remove the spare tire, mount the light onto the existing studs, connect the positive and negative wires to the third brake light wiring, then put the tire back in place.
- Complete package: The box includes 1 spare tire brake light unit, so you have everything needed to get it mounted and wired up.
With a straightforward mounting process and LED longevity, this is a practical way to boost brake visibility without complicating your Jeep’s rear setup.
The Nilight Spare Tire Brake Light: What Shines and What Dims
What works well
- Bright LED output — 85 LEDs deliver clear, immediate brake signals for better visibility.
- Jeep-specific fit — Designed for Wrangler 2007-2018 JK/JKU models with common lug patterns.
- Simple installation — Mounts on existing studs and wires into the third brake light.
- Long-lasting durability — Rated for 30,000 hours of reliable, maintenance-free performance.
- Stylish upgrade — Adds a clean, modern look that complements the spare tire area.
What to watch out for
- Fitment limitations — Only works with 16-20 inch rims and specific 5-lug patterns.
- Wiring effort required — Needs careful connection to existing brake light wiring.
- Not universal — Won’t fit older or newer Wranglers outside the 2007-2018 range.
- Occasional quality hiccups — A small share of buyers reported issues with the unit.

How the Nilight Spare Tire Brake Light Performs in Real Use
Build Quality and Waterproofing You Can Count On
The Nilight spare tire brake light feels solid right out of the box. You get an ABS plastic frame that is tough enough for off-road abuse.
With an IP67 waterproof rating, you won’t worry about mud, rain, or pressure washing. Most reviewers say it holds up well in harsh conditions.
The 85 LED chips are bright and evenly spaced across the 14-inch diameter. You’ll notice the red glow immediately when you hit the brakes.
Installation: Simple Enough for a Weekend Project
You don’t need special tools or mechanical skills here. The process is straightforward: remove the spare tire, place the light on the studs, and wire it up.
You’ll connect the positive and negative wires to your existing third brake light circuit. It takes most people about 20 to 30 minutes total.
Reviewers note that the universal fit works well for most Jeep Wrangler setups. Just make sure your lug pattern matches the 5×5, 5×4.5, or 5×5.5 inch options.
The $5,000 Car Savings Challenge
Find hidden car costs. Compare insurance, fuel, service and repair bills with a 200-page illustrated workbook and practical action sheets.
Real-World Visibility and Safety Benefits
This light gives you a clear braking signal that drivers behind you will see sooner. That extra visibility is huge for highway driving and off-road trails.
Because it sits on the spare tire, it raises the brake light higher than your factory bumper lights. You’ll get better sightlines in traffic, especially for taller vehicles behind you.
With a 30,000-hour lifespan, you’ll likely never need to replace these LEDs. That long service life makes it a smart upgrade for daily drivers and weekend warriors alike.
Fitment Details for Jeep Wrangler Owners
This light is designed for Jeep Wrangler 2007-2018 JK and JKU models. It works with spare tires from 16 to 20 inches in diameter.
You’ll want to double-check your wheel’s lug pattern before buying. The light fits 5×5, 5×4.5, and 5×5.5 inch patterns.
Most buyers with stock wheels report a perfect fit. A few reviewers mention needing to adjust wire routing, but nothing that requires extra parts.
Value and Overall Satisfaction
At a 4.5-star average, buyers are clearly happy with this upgrade. 76% of reviewers give it five stars, praising brightness and easy install.
You get a functional third brake light and a stylish rear decoration in one package. The red LED output matches your factory tail lights nicely.
For a simple, durable safety addition to your Jeep, this Nilight model delivers. It’s a smart purchase that boosts visibility without complicated wiring or modifications.
Quick Specs at a Glance
| Feature | Detail |
|---|---|
| Number of LEDs | 85 red LEDs |
| Product Diameter | 14 inches |
| Operating Voltage | 12V DC |
| Material | ABS plastic frame |
| Waterproof Rating | IP67 |
| Lifespan | 30,000+ hours |
Quick specs
| additional_features | Waterproof |
| asin | B07RZ49GXM |
| auto_part_position | Rear |
| automotive_fit_type | Universal Fit |
| best_sellers_rank | #24,040 in Automotive (See Top 100 in Automotive) #52 in Automotive High Mount Stop Light Assemblies |
| brand_name | Nilight |
| color | JK 2007-2017 Tire Brake Light |
| compatible_with_vehicle_type | jeep |
| customer_reviews | 4.5 4.5 out of 5 stars (1,986) 4.5 out of 5 stars |
| global_trade_identification_number | 00767912576848 |
| included_components | Tire Brake Light |
| item_highlight | Red LED rear brake light fits 2007-2018 Jeep Wrangler JK JKU with spare tire mount. Enhances rear visibility and safety |
| item_type_name | Nilight Spare Tire Brake Light Wheel Light 3rd Third Brake Light Rear lights for Wrangler 2007-2018 JK JKU YJ TJ Red Light, |
| lens_color | Red |
| lens_material | Plastic |
| light_source | LED |
| manufacturer | Nilight |
| manufacturer_part_number | TL-12 |
| manufacturer_warranty_description | 2 Years Warranty |
| model_number | TL-12 |
| model_year | 2007 |
| number_of_items | 1 |
| number_of_packs | 1 |
| oem_equivalent_part_number | TL-12 |
| set_name | Spare Tire Brake Light Set |
| specific_uses_for_product | Rear Lights |
| unit_count | 1 Count |
| upc | 767912576848 |
| voltage | 12 volts |
| wattage | 28 watts |
Final verdict
Absolutely grab this if you tow, haul, or want extra visibility—the Nilight spare tire brake light earns its 4.5-star glow with easy installation and a solid, bright signal that makes other drivers notice you.
Hardcore off-roaders might find the wiring a bit fiddly, but that’s a minor snag for most. Check the buttons above to see if it’s still in stock for your rig.

I am Jaxon Mike, the owner of the Rcfact website. Jaxon Mike is the father of only one child. My son Smith and me we are both RC lovers. In this blog, I will share tips on all things RC including our activities, and also share with you reviews of RC toys that I have used.