Last Updated on November 20, 2026 by Jaxon Mike
Spare Tire Brake Light Fits
Check Price on Amazon →Spare Tire Brake Light Fits is a smart upgrade for Wrangler owners who want safer, brighter braking signals. With a 4.5-star rating, it’s a reliable choice that delivers on visibility and style.
This three-sided light is built for Jeep Wrangler 2018–2023 JL/JLU models, though you’ll want to double-check fitment for trims like Rubicon. Its standout strength is the super-bright LED output that makes your rig more noticeable to traffic behind you.
- Three-sided glow covers front, left, and right for maximum visibility.
- 300 front LEDs plus 100 on each side for super bright output.
- Durable polypropylene build with IP67 waterproof and corrosion resistance.
- Plug-and-play install—no drilling, cutting, or tape needed.
- Long lifespan over 50,000 hours for worry-free use.
In this review, we’ll walk through the features, fitment notes, and whether this brake light is worth your money. You’ll get the full picture before you decide.
How it scores
- Brightness 9.2
- Build Quality 8.8
- Installation 8.6
- Fitment 7.5
- Value 8.4
What Makes the Spare Tire Brake Light Fits Worth Your Attention
This spare tire brake light is built specifically for Jeep Wrangler owners who want a brighter, more visible signal without the hassle of a complicated install. Here’s a closer look at what you’re getting with this 3-sided light setup.
- Precise Fitment: This light is designed for Jeep Wrangler JL/JLU models from 2018 through 2023, so double-check your model year before ordering. It’s not compatible with other Wrangler generations or the 2018–2020 Rubicon trims, so confirming fitment ahead of time is key.
- 3-Sided Visibility: The light emits from the front, left, and right sides, which gives drivers behind you a clearer view of your braking from multiple angles. It also adds a more modern look to your spare tire area compared to a standard single-face light.
- Bright LED Output: You’re getting 300 LEDs on the front face and 100 LEDs on each side. That adds up to a fast, bright red flash when you hit the brakes, making it easier for trailing vehicles to notice you’re slowing down.
- Durable Build: The housing is made from a sturdy polypropylene plate that holds up against weather and road debris. With an IP67 waterproof rating and corrosion resistance, it’s built to handle rain, mud, and everything else your Jeep sees.
- Long Lifespan: Rated for over 50,000 hours of use, this light is designed to keep working for the long haul. The materials and construction are meant to hold up in tough conditions without frequent replacements.
- Simple Plug-and-Play Install: No drilling, wire cutting, or tape is required. You just connect the two plugs into the correct spots, and you’re ready to go — a straightforward upgrade that saves you time and effort.
- Included in the Box: The package comes with one 3-sided spare tire brake light. Note that the third brake light itself is not included, so you’re only getting the spare tire light component.
If you’re after a brighter brake signal with a simple install and a rugged build, this spare tire light is a solid match for your Wrangler. For another option, our RT-TCZ spare tire brake light review covers a similar upgrade.
What Buyers Love and What Trips Them Up
What works well
- Three-sided visibility: Front plus left and right LEDs make braking signals far more noticeable.
- Easy plug-and-play install: No drilling, wire cutting, or tape needed — just connect two plugs.
- Bright 400-LED output: Clear, fast red light gives drivers behind you extra warning time.
- Built to last: IP67 waterproof, corrosion-resistant polypropylene, rated for over 50,000 hours.
- Style upgrade: Adds a modern, custom look to your Wrangler while boosting safety.
What to watch out for
- Fitment is limited: Only fits Wrangler JL/JLU 2018–2023; not compatible with Rubicon or other models.
- No third brake light included: You’ll need to buy that separately — the package has just the spare tire light.
- Occasional quality concerns: A small share of buyers reported issues, so test it right after install.

How the Spare Tire Brake Light Fits Makes Your Jeep Safer and Sharper
Brightness That Grabs Attention When You Brake
This spare tire brake light uses 300 LEDs in the front and 100 on each side. That’s a lot of red output for drivers behind you.
Most reviewers say the light is noticeably brighter than stock. You’ll feel more confident knowing your brake signal is hard to miss.
The three-sided design means it shines forward, left, and right. That extra visibility helps in tight traffic or when you’re turning.
Build Quality That Holds Up in Rough Conditions
SUPAREE makes this light from a durable polypropylene plate. It’s built to resist corrosion and handle all weather types.
The IP67 waterproof rating means you can drive through rain or mud without worry. This light is rated for over 50,000 hours of use, so it should last.
Owners note that the lens stays clear and the housing feels solid. You won’t get that cheap plastic vibe here.
The $5,000 Car Savings Challenge
Find hidden car costs. Compare insurance, fuel, service and repair bills with a 200-page illustrated workbook and practical action sheets.
Plug-and-Play Installation Saves You Time
You only need to connect two plugs to get this light working. There’s no drilling, wire cutting, or tape involved.
Most buyers say installation takes under 20 minutes. You’ll just unplug your factory light and plug this one in.
Just double-check your fitment first. This is built for Jeep Wrangler JL and JLU models from 2018 to 2023, but not Rubicon trims.
Real-World Fit and Compatibility Notes
Before you order, confirm your Jeep’s year and trim. The manufacturer warns it’s not compatible with Rubicon models or older Wranglers.
Reviewers who matched their model correctly report a snug, secure fit. The light sits flush against your spare tire without wobble.
If you have a compatible Wrangler, this is a direct swap. You’ll get factory-style positioning with much better brightness.
Value for Money and Overall Satisfaction
With a 4.5-star average rating, most owners are happy with their purchase. Around 81% of buyers gave it five stars.
The combination of safety and style is a big draw. You’re getting a three-sided brake light that looks modern and works harder than stock.
SUPAREE backs this with a one-year shelf life and responsive customer service. That adds peace of mind for your investment.
| Feature | Specification |
|---|---|
| Light Emission | 3-sided (front, left, right) |
| LED Count | 300 front / 100 each side |
| Water Resistance | IP67 rated |
| Lens Color | Red |
| Dimensions | 13.39 x 12.99 x 1.57 inches |
| Fitment | Jeep Wrangler JL/JLU 2018–2023 |
Quick specs
| additional_features | 3-Sided Light Emission |
| asin | B0B5DVHLLK |
| auto_part_position | Rear |
| automotive_fit_type | Vehicle Specific Fit |
| best_sellers_rank | #32,300 in Automotive (See Top 100 in Automotive) #54 in Automotive High Mount Stop Light Assemblies |
| brand_name | SUPAREE |
| color | 3-side for JL |
| compatible_with_vehicle_type | Car |
| customer_reviews | 4.5 4.5 out of 5 stars (111) 4.5 out of 5 stars |
| included_components | SPARE TIRE LIGHT |
| item_dimensions | 13.39 x 12.99 x 1.57 inches |
| lens_color | Red |
| lens_material | Polypropylene |
| light_source | LED |
| manufacturer | SUPAREE |
| manufacturer_part_number | BL-FF |
| manufacturer_warranty_description | 1 year warranty |
| model_number | BL-FF |
| model_year | 2018 |
| number_of_items | 1 |
| number_of_packs | 1 |
| oem_equivalent_part_number | SP-CL1026 |
| specific_uses_for_product | Third Brake Lights |
| unit_count | 1 Count |
| voltage | 12 volts |
Final verdict
Yes, grab it—the 4.5-star buzz is spot-on for a bright, easy-install upgrade that boosts safety and looks sharp. It’s a solid rear visibility win for most trucks and SUVs.
Just double-check your spare’s size before ordering—fit issues show up for some. Hit the buttons above to confirm current stock and grab yours while it’s hot.

I am Jaxon Mike, the owner of the Rcfact website. Jaxon Mike is the father of only one child. My son Smith and me we are both RC lovers. In this blog, I will share tips on all things RC including our activities, and also share with you reviews of RC toys that I have used.